Need help?Do you have a question about the Datalogic Magellan 2300HS and is the answer not in the manual?
General| Scanner type | 1D |
|---|---|
| Decoding standards | GS1 DataBar |
| Input voltage | 90 - 265 V |
| Power requirements | 47-63 Hz |
| Power consumption (standby) | 2.5 W |
| Dimensions (WxDxH) | 152 x 152 x 86 mm |
| Certification | RoHS |
| Product color | Gray |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 10 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Weight | 1100 g |
|---|
Presents the manual's contents, describes features and specifications, provides regulatory and safety information, and lists bar code symbologies.
Details the controls, indicators, and other nomenclature for the scanner models.
Describes the appearance of the connector panel and available ports on the scanner.
Provides specifications for performance, environmental, and electrical parameters of the scanner.
Details requirements for site electrical service and compatibility with international systems.
Covers laser safety requirements, user maintenance, and operational cautions.
Shows regulatory, reference, and safety labeling for both scanner models.
Lists agencies and regulations the scanner meets or exceeds.
Lists the bar code types (symbologies) that the scanner can read/decode.
Provides instructions on how to inspect and unpack the scanner unit.
Steps to ensure the unit is undamaged and functional before installation.
Details installation procedures for the Magellan 2200VS scanner.
Describes the flush countertop mounting for the Magellan 2300HS scanner.
Explains the 'Sweep' and 'Presentation' scanning techniques for the 2200VS model.
Details how to slide items for scanning on the flush countertop 2300HS model.
Lists the functions of scanner controls and indicators.
Describes pre-operational, operational, and additional scanner modes.
Covers programming, running scanner diagnostics, and initiating resets.
Explains the procedure for resetting the scanner electronics.
Provides procedures to keep the scanner operating at peak performance.
Walks through diagnostic processes to isolate failed components and corrective actions.
Describes error codes, probable causes, and corrective actions for scanner issues.
Provides problem isolation flowcharts to identify and troubleshoot system issues.
Explains how programming bar codes in the manual customize scanner features.
Details programming categories: General Features, EAS, and Interface Related Features.
Covers features common to all interface types like button options and timeouts.
Mandatory settings for host communication, like RS-232 baud rate and parity.
Enables autodiscrimination and configuration of various bar code symbologies.
Details functions of the Volume/Tone push button based on press duration.
Explains the green LED indications for scanner status.
Specifies cable length and gauge requirements for RJ-45 connectors.
Provides pinout information for the auxiliary port connector hardware.
Lists RS-232 commands the scanner responds to, including ASCII and Hex values.
Describes general data format and communication parameters for handheld scanners.
Details typical factory configurations for Datalogic handheld scanner data formats.
Summarizes keyboard models, protocols, scancode sets, and features.
To Next Page
