244 Magellan
®
2200VS/2200VS and 2300HS/2300HS
UPC/EAN Guard Insertion
Enables/Disables the ability of the scanner to insert either a missing lead-
ing or trailing guard on an otherwise complete UPC-A/EAN-13 segment
it has received.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
UPC/EAN GUARD INSERTION = DISABLE
UPC/EAN GUARD INSERTION = ENABLE
To Next Page
Loading...
