Symbology Programming
Product Reference Guide 179
Symbology Programming
NOTE
Coupon Control
Used to control the method of processing coupon labels.
Options are:
• Disable coupon decoding
• Enable UPC/EAN coupon decoding
• Enable RSS coupon decoding
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
COUPON CONTROL = DISABLE
If the scanner’s interface type must be changed, always be sure that
interface configurati
on is the FIRST item scanned during a pro-
gramming session. (Selecting an interface type resets ALL other
configuration items — including symbology programming — to the
factory default for that interface type.)
To Next Page
Loading...
