Datalogic Magellan 2300HS User Manual

Introduction
1-6 Magellan
®
2200VS/2200VS and 2300HS/2300HS
Figure 1-4. Environmental Specifications
Electrical Specifications
Before installation, always verify that the site’s electrical service meets the
scanner’s requirements. The scanner has been engineered for compatibility
with most international electrical systems. Verify that the power source
will supply “clean” electrical power to the equipment; that is, it must be
free of excess electrical noise.
If the adapter will not plug into your AC power receptacle, the model
shipped is not compatible with your electrical system. Please contact your
distributor immediately to receive the necessary information and compo-
nents to ensure electrical compatibility.
Operation
Storage
+40 C +104 F
10 C 50 F
Temperature
10 to +40 C
50 to +104 F
Dust Resistant
Optics Cavity, IP5X
+70 C +158 F
-40 C -40 F
Temperature
-40 to +70 C
-40 to +158 F
Illumination
Artificial Light:
450 Foot-candles
Sunlight:
0-8,000 Foot-candles
POS Scanner
Humidity
5 - 95% NC

Datalogic Magellan 2300HS Specifications

General

Scanner type	1D
Decoding standards	GS1 DataBar
Input voltage	90 - 265 V
Power requirements	47-63 Hz
Power consumption (standby)	2.5 W
Dimensions (WxDxH)	152 x 152 x 86 mm
Certification	RoHS
Product color	Gray
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	1100 g