Datalogic Magellan 2300HS User Manual

Keyboard Wedge/USB Keyboard Features
Product Reference Guide 163
Keyboard Wedge/USB Keyboard Features
Features listed in this section apply to both the Keyboard Wedge and USB
Keyboard interfaces unless otherwise noted.
Keyboard Interface — Keyboard Layout
This feature specifies the country/language to be supported by the key-
board.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the appropriate country bar code from the following pages.
You’ll need to cover any unused bar codes on that and the facing
page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
KEYBOARD LAYOUT = USA
KEYBOARD LAYOUT = BELGIUM

Datalogic Magellan 2300HS Specifications

General

Scanner type	1D
Decoding standards	GS1 DataBar
Input voltage	90 - 265 V
Power requirements	47-63 Hz
Power consumption (standby)	2.5 W
Dimensions (WxDxH)	152 x 152 x 86 mm
Certification	RoHS
Product color	Gray
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	1100 g