Datalogic Magellan 2300HS - EAN Two Label Minimum Reads

248 Magellan
®
2200VS/2200VS and 2300HS/2300HS
EAN Two Label Minimum Reads
Specifies the minimum number of consecutive times an EAN Two Label
bar code must be decoded before it is accepted as a good read.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option below or on the
following pages. You’ll need to cover any unused bar codes on facing
pages to ensure that the scanner reads only the bar code you intend
to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
EAN TWO LABEL MINIMUM READS = 1
EAN TWO LABEL MINIMUM READS = 2