Datalogic Magellan 2300HS User Manual

IBM Features
Product Reference Guide 117
IBM Number of Host Resets
Specifies how many consecutive resets are processed before the scanner
starts a five-second period during which a user is allowed to enter label-
programming mode and configure the scanner.
To set the number of host resets:
1. Scan the SWITCH bar code.
2. Scan the bar code,
SET IBM NUMBER OF HOST RESETS. You’ll
need to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C that rep-
resent the desired number of host resets. The selectable range is 1-15
resets. Pad all single and double digit numbers with leading zeroes to
yield a three-digit entry (001-015).
Examples:
001 = 1 reset
005 = 5 resets
011= 11 resets
4. The scanner will automatically exit Programming Mode when the
appropriate amount of digits have been scanned
SET IBM NUMBER OF HOST RESETS

Datalogic Magellan 2300HS Specifications

General

Scanner type	1D
Decoding standards	GS1 DataBar
Input voltage	90 - 265 V
Power requirements	47-63 Hz
Power consumption (standby)	2.5 W
Dimensions (WxDxH)	152 x 152 x 86 mm
Certification	RoHS
Product color	Gray
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	1100 g