Datalogic Magellan 2300HS User Manual

116 Magellan
®
2200VS/2200VS and 2300HS/2300HS
IBM Features
IBM Interface Options
IBM interfaces offer specific control over interaction with certain devices.
Options for this feature are as follows:
• FULL host interface support — Accepts scanner configuration host
commands.
• Ignore host interface configuration of scanner — Ignores all scanner
configuration host commands.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
IBM INTERFACE OPTION = FULL HOST INTERFACE SUPPORT
IBM INTERFACE OPTION = IGNORE HOST I/F CONFIG OF SCANNER
NOTE
The USB-OEM interface provides its own set of options. Refer to the feature,
USB-OEM Scanner Device Type, in this chapter.

Datalogic Magellan 2300HS Specifications

General

Scanner type	1D
Decoding standards	GS1 DataBar
Input voltage	90 - 265 V
Power requirements	47-63 Hz
Power consumption (standby)	2.5 W
Dimensions (WxDxH)	152 x 152 x 86 mm
Certification	RoHS
Product color	Gray
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	1100 g