Need help?Do you have a question about the Datalogic MAGELLAN 1400I and is the answer not in the manual?
General| Brand | Datalogic |
|---|---|
| Model | MAGELLAN 1400I |
| Category | Barcode Reader |
| Language | English |
Sets time limit for reading the same label again, e.g., two identical items in succession.
Details scanner feedback via LED and beeper for functions and errors.
Specifies when the scanner provides indication (beep/LED flash) upon successful barcode reading.
Enables or disables the scanner's ability to beep upon a successful decode of a barcode.
Covers aiming pointer and targeted scanning mode settings.
Specifies the time duration the scanner attempts to decode labels in targeted mode.
Specifies time scanner remains in targeted mode after reading before reverting to Omni-directional Mode.
Allows selection of the desired interface type for scanner configuration.
Configures scanner behavior regarding host commands.
Configuration options for the RS-232 serial interface.
Configuration options for the USB-OEM interface.
Settings for transmitting barcode data as a wand device.
Settings for keyboard wedge interface, including layout and control characters.
Settings for USB keyboard interface, including layout and control characters.
Explains building message strings with barcode data and user-defined data.
Adds up to 20 ASCII characters as a prefix or suffix to barcode data.
Configures custom label identifiers for barcode symbologies.
Converts scanned barcode data to all lower or upper case characters.
Options for UPC-A symbology, including enable/disable and check digit transmission.
Options for UPC-E symbology, including enable/disable and check digit transmission.
Options for EAN-13 symbology, including enable/disable and check digit transmission.
Options for EAN-8 symbology, including enable/disable and check digit transmission.
Options for GS1 DataBar Omnidirectional symbology.
Options for GS1 DataBar Expanded symbology.
Options for GS1 DataBar Limited symbology.
Options for Code 39 symbology, including enable/disable and check character calculation.
Configures fixed or variable length decoding for Datamatrix barcodes.
Allows capturing and transmitting images using the scanner.
Details scan volume, pattern, rate, resolution, depth of field, contrast ratio, skew, pitch, and roll.
Lists default settings for RS-232 and exceptions for other interfaces.
Details scanner responses to RS-232 commands like Enable Scanner, Disable Scanner, and Reset Scanner.
To Next Page
