General Features
2-12 Magellan
®
1400i
Target Mode: Linger Time
Specifies the time duration the scanner remains in the targeted mode of operation after reading
a bar code or after
Target Mode: Active Time has expired, before reverting to Omni-directional
Mode. The linger timer starts upon a good read or upon timeout of
Target Mode: Active Time;
whichever is earliest. A button press at any time will reset the process back to the start.
NOTE
Active Time and Linger Time settings are totally indepen-
dent from one another.
During the period Linger Time is active, no bar codes can
be read, no matter what mode the scanner is in.
START / END
PROGRAMMING BAR CODES
Short Duration
Medium Duration
DEFAULT
Long Duration
To Next Page
Loading...
