Need help?Do you have a question about the Datalogic Magellan 8500Xt and is the answer not in the manual?
General| Type | Built-in bar code reader |
|---|---|
| Sensor type | - |
| Read rate (max) | 6400 reads/s |
| Yaw reading angle | 0 - 360 ° |
| Linear (1D) barcodes supported | GS1-128 (UCC/EAN-128) |
| 2D (matrix & stacked) barcodes supported | Not supported |
| Standard interfaces | RS-232 |
| Connectivity technology | Wired |
| Input voltage | 100 - 250 V |
| Input frequency | 50 Hz |
| Power source type | AC |
| Power consumption (typical) | 9 W |
| Product color | Grey, Silver |
| Sustainability certificates | RoHS |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 10 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 127 mm |
|---|---|
| Width | 292 mm |
| Height | 178 mm |
| Weight | - g |
Details laser safety requirements, radiant energy, and laser light viewing precautions.
Provides information on Datalogic website, reseller, and telephone technical support resources.
Guidelines for checkstand design to ensure cashier safety, productivity, and ergonomics.
Steps to ensure the unit is undamaged and functional before connecting to the POS system.
Considerations for routing power and interface cables to the scanner and scanning-scale.
Instructions on how to slide items through the scanner's scan zone for accurate reading.
Best practices for placing items on the platter for accurate weight measurement.
Procedures for zeroing the scale and understanding calibration adjustments.
Describes scanner error codes, their meaning, and corrective actions for failure indications.
Provides visual flowcharts for troubleshooting common system problems.
Step-by-step procedure for calibrating the scale using standard weights.
Verification procedures following NIST Handbook-44 guidelines for pound calibration.
Configures the communication speed for RS-232 interfaces.
Allows enabling or disabling of various barcode symbologies for scanning.
To Next Page
