7-200 Magellan
TM
8500Xt Scanner
DataBar Expanded Length Control
This feature specifies either variable-length or fixed-length decoding for
DataBar Expanded.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below. You’ll need to cover
any unused bar
codes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
3. Complete the programming seque
nce by scanning the SWITCH
barcode.
DATABAR EXPANDED LENGTH CONTROL = VARIABLE-LENGTH
DATABAR EXPANDED LENGTH CONTROL = FIXED-LENGTH
To Next Page
Loading...
