7-268 Magellan
TM
8500Xt Scanner
MSI/Plessey Stitching
Enables/disables stitching for MSI/Plessey labels. When parts of an MSI/
Plessey barcode are presented to the scanner with this feature enabled, the
barcode parts will be assembled by the scanner’s software, and the data will
be decoded if all barcode proofing requirements are met.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below. You’ll need to cover
any unused bar
codes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
Complete the programming sequence b
y scanning the SWITCH barcode.
MSI/PLESSEY STITCHING = DISABLE
MSI/PLESSEY STITCHING = ENABLE
To Next Page
Loading...
