Datalogic Magellan 8500Xt User Manual

Product Reference Guide C-1
Appendix C
Keypad
Use the barcodes in this section to enter numbers and characters as you
would select digits/characters from a keypad.
Scan your selection from the barcodes below. You’ll need to cover any
unus
ed barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
0
1

Datalogic Magellan 8500Xt Specifications

General

Type	Built-in bar code reader
Sensor type	-
Read rate (max)	6400 reads/s
Yaw reading angle	0 - 360 °
Linear (1D) barcodes supported	GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	RS-232
Connectivity technology	Wired
Input voltage	100 - 250 V
Input frequency	50 Hz
Power source type	AC
Power consumption (typical)	9 W
Product color	Grey, Silver
Sustainability certificates	RoHS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	127 mm
Width	292 mm
Height	178 mm
Weight	- g