Product Reference Guide 7-261
MSI/Plessey Number of Check Characters
Specifies number of MSI/Plessey check characters to be calculated and
verified.
NOTE
Check characters are always modulus 10.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode below representing the desired number of MSI/
P
lessey check characters to be calculated and verified. You’ll need
to cover any unused barcodes on this and the facing page to
ensure that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scan
ning the SWITCH
barcode.
MSI/PLESSEY NUMBER OF CHECK CHARACTERS = 1
MSI/PLESSEY NUMBER OF CHECK CHARACTERS = 2
To Next Page
Loading...
