Datalogic Magellan 8500Xt

7-198 Magellan
TM
8500Xt Scanner
DataBar Expanded AIM ID
This feature enables/disables transmission of the DataBar Expanded AIM
symbology identifier.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below. You’ll need to cover
any unused bar
codes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
3. Complete the programming seque
nce by scanning the SWITCH
barcode.
DATABAR EXPANDED AIM ID = DISABLE
DATABAR EXPANDED AIM ID = ENABLE