Datalogic Magellan 8500Xt User Manual

1-10 Magellan
TM
8500Xt Scanner
Power Supply
The scanner utilizes a single power supply for all models. Unique installa-
tion and international connections are acc
omplished through selection of
the proper IEC power cord
VOLTAGE FREQUENCY CURRENT (RMS) PART NUMBER
100-240VAC ±10% 50-60 Hz 0.5 Amps @ 100V 8-0761
CAUTION
Safe operation of your scanner or scanning-scale requi
res properly grounded
electrical outlets. Be sure to have a qualified electrician certify the earth-
ground connection on circuits which will be used to power the unit.
NOTE
The scanner is powered on/off by connecting/disconnecting its
AC power
supply.

Datalogic Magellan 8500Xt Specifications

General

Type	Built-in bar code reader
Sensor type	-
Read rate (max)	6400 reads/s
Yaw reading angle	0 - 360 °
Linear (1D) barcodes supported	GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	RS-232
Connectivity technology	Wired
Input voltage	100 - 250 V
Input frequency	50 Hz
Power source type	AC
Power consumption (typical)	9 W
Product color	Grey, Silver
Sustainability certificates	RoHS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	127 mm
Width	292 mm
Height	178 mm
Weight	- g