Product Reference Guide 7-263
MSI/Plessey AIM ID
This feature enables/disables transmission of the MSI/Plessey AIM sym-
bology identifier.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes belo
w. You’ll need to cover
any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scan
ning the SWITCH
barcode.
MSI/PLESSEY AIM ID = DISABLE
MSI/PLESSEY AIM ID = ENABLE
To Next Page
Loading...
