Datalogic Magellan 8500Xt

7-218 Magellan
TM
8500Xt Scanner
Code 128 Enable
Enables/disables the ability of the scanner to decode Code 128 labels.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You’ll need to
co
ver any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming seque
nce by scanning the SWITCH
barcode.
CODE 128 = DISABLE
CODE 128 = ENABLE