Datalogic Magellan 8500Xt

7-96 Magellan
TM
8500Xt Scanner
RS-232 Parity
Specifies parity required for sending and receiving data.
Options for this setting are:
•
RS-232 PARITY = NONE
• RS-232 PARITY = EVEN
• RS-232 PARITY = ODD
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode below or on the following pages representing
the des
ired Parity setting. You’ll need to cover any unused bar-
codes, as well as facing pages to ensure that the scanner reads only
the b
arcode you intend to scan.
3. Complete the programming seque
nce by scanning the SWITCH
barcode.
RS-232 PARITY = NONE