Datalogic Magellan 800i - Image Brightness; Image Contrast

General Features
22 Magellan
TM
800i
Image Brightness
This feature sets the image brightness value. Follow these instructions to configure this feature:
1. Scan the START bar code.
2. Scan the Set Image Brightness bar code.
3. Turn to
Alphanumeric Pad and scan the two digits (zero-padded) representing the desired
brightness in decimal notation. The configurable range is 00-0x0A by increments of 01.
4. Scan the END bar code.
Image Contrast
This feature sets the image contrast value. Follow these instructions to configure this feature:
1. Scan the START bar code.
2. Scan the Set Image Contrast bar code.
3. Turn to
Alphanumeric Pad and scan the two digits (zero-padded) representing the desired
contrast in decimal notation. The configurable range is 00-0x0A by increments of 01.
4. Scan the END bar code.
START / END
PROGRAMMING BAR CODES
Set Image Brightness
DEFAULT SETTING FOR THIS FEATURE: 00
03EB(CR)
START / END
PROGRAMMING BAR CODES
Set Image Contrast
DEFAULT SETTING FOR THIS FEATURE: 00
03EC(CR)