Datalogic Magellan 800i - Host Transmission Buffers

Interface Related Features
28 Magellan
TM
800i
Interface Features — cont.
Host Transmission Buffers
Specifies the number of host transmission(s) that may be buffered. By buffering data from a bar
code, the scanner can continue to read a new bar code while the old one is being transmitted to
the host. Selecting BUFFERS = 1 means that the first bar code must be transmitted before a
new one can be read. A selection of BUFFERS = 2 means that a new bar code can be read while
data from the first bar code is transmitted.
When a DISABLE SCANNER command is received from the host, the scanner will continue to
transmit all data that is buffered.
START / END
PROGRAMMING BAR CODES
Host Transmission Buffers = 1
Host Transmission Buffers = 2
DEFAULT
004B00(CR)
004B01(CR)