2 Magellan
TM
9300i and 9400i
Certification Label
At the time the local scale regulatory authority certifies the scanner/scale for use, a cer-
tification label is affixed to the unit. Depending upon the si
ze and shape of the label,
placement can be made in one of the locations shown in Figure 1.
Figure 1. Affixing the Scale Certification Label
1
2
3
5
6
4
1 Left end of scanner bonnet 4 Remote Display Post
2 Right end of scanner bonnet 5
Back of Bonnet on either side of
the logo.
3 Back of Remote Display Head 6
To Next Page
Loading...
