Need help?Do you have a question about the Datalogic PowerScan CM9630 and is the answer not in the manual?
General| Type | Handheld |
|---|---|
| IP Protection | IP65 |
| Light Source | LED |
| Interfaces | USB, RS-232 |
| Operating Temperature | -10 to 50 °C |
| Drop Resistance | 2 m |
| ESD Protection | 15 kV air, 8 kV contact |
| Decode Capabilities | 1D, 2D, QR Codes |
| Scan Rate | 60 scans/sec |
| Supported Barcodes | UPC, EAN, Code 39, Code 128, PDF417, Data Matrix |
| Storage Temperature | -40 to 70 ºC / -40 to 158 ºF |
| Humidity | 0 to 95% non-condensing |
| Power Supply | 5V DC |
Steps to physically install the base station.
Details on permanently attaching the base station.
Instructions for mounting the base station on a wall.
Methods for mounting the base station for desktop use.
How to connect the base station via RS232.
How to connect the base station via USB.
How to connect the base station via Ethernet.
To Next Page