Datalogic PowerScan D8300 Quick Reference Guide

PowerScan® M8300 Configuration
Quick Reference Guide 11
END of procedure. YOUR READER IS NOW READY TO READ CODES.
6. Set Radio Address
ÌRF8Î
+
four digits from the Numeric Table for the PowerScan
®
M8300 Address
(from 0000 to 1999).
All readers used in the same area must have different addresses.
7. Set First STAR-System™ Address
ÌRSRÎ
+
four digits from the Numeric Table in the range 0000 to 1999
8. Set Last STAR-System™ Address
ÌRTTÎ
+
four digits from the Numeric Table in the range 0000 to 1999
Whenever the system is composed of a single base station, the first and
last base station addresses (steps 7 and 8) must have the same value.
9. Exit and Save Configuration
Ì$-?Î

Datalogic PowerScan D8300 Specifications

General

Brand	Datalogic
Model	PowerScan D8300
Category	Barcode Reader
Language	English