EasyManuals Logo
Home>Datalogic>Barcode Reader>QuickScan BC2030

Datalogic QuickScan BC2030 User Manual

Datalogic QuickScan BC2030
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Connecting the Base Station
Quick Reference Guide 9
WARNING
Do not place the battery pack in fire or heat.
Do not connect the positive terminal and
negative terminal of the battery pack to each
other with any metal object (such as wire).
Do not carry or store the battery pack
together with metal objects.
Do not pierce the battery pack with nails,
strike it with a hammer, step on it or other-
wise subject it to strong impacts or shocks.
Do not solder directly onto the battery pack.
Do not expose the battery pack to liquids, or
allow the battery to get wet.
Do not apply voltages to the battery pack
contacts.
WARNING
In the event the battery pack leaks and the
fluid gets into your eye, do not rub the eye.
Rinse well with water and immediately seek
medical care. If left untreated, the battery fluid
could cause damage to the eye.
CAUTION
Always charge the battery at 32° – 104°F (0° -
40°C) temperature range.
CAUTION
Use only the authorized power supplies, bat-
tery pack, chargers, and docks supplied by
your Datalogic reseller. The use of any other
power supplies can damage the device and
void your warranty.
Do not disassemble or modify the battery. The
battery contains safety and protection devices,
which, if damaged, may cause the battery to
generate heat, explode or ignite.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic QuickScan BC2030 and is the answer not in the manual?

Datalogic QuickScan BC2030 Specifications

General IconGeneral
BrandDatalogic
ModelQuickScan BC2030
CategoryBarcode Reader
LanguageEnglish

Related product manuals