Country Mode
Quick Reference Guide 19
Country Mode
HID configuration: Scan any one of the bar codes in the table
below to set
the country for which your PC is localized.
Base configuration:
Only the following interfaces support
ALL Country Modes:
• USB Keyboard (without alternate key encoding)
• AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/
Std Key Encoding
• Keyboard Wedge for IBM AT PS2 with standard key
encoding but without external keyboard
• AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
without Alternate Key
• Keyboard Wedge for IBM AT PS2 without alternate key
encoding but without external keyboard
All other interfaces support ONLY the following : U.S., Belgium,
Britain, France, Germany, Italy, Spain, Sweden.
The following bar codes can be used either
while in HID mode (when reader is connected
using Bluetooth) or for configuring the base.
COUNTRY MODE
ENTER/EXIT PROGRAMMING MODE
Country Mode = U.S.
Country Mode = Belgium
Country Mode = Britain
To Next Page
Loading...
Need help?
General
