Datalogic QuickScan QM2400 User Manual

Reading Parameters
24 QuickScan™ QM2400
Reading Parameters
Point the reader at the target and pull the trigger to enable
the aiming system and the illuminator (red beam) to decode
the bar code label. The aiming system will briefly switch off
during the acquisition time and if no code is decoded will
switch on again before the next acquisition. The illuminator
will remain on until the symbol is decoded.
As you read code symbols, adjust the distance at which you
are holding the reader.
Aiming System
A number of options for customizing control of the Aiming
System are available. See the PRG for more information and
programming bar codes.

Datalogic QuickScan QM2400 Specifications

General

Brand	Datalogic
Model	QuickScan QM2400
Category	Barcode Reader
Language	English