Ergonomic Recommendations
40 QuickScan™ QM2400
Cleaning
Exterior surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure best
performance during scanning. Contacts on the scanner and
base should also be cleaned as needed to ensure a good con-
nection.
Be sure to unplug the product from electrical outlet before
cleaning.
Use a soft, dry cloth to clean the product. If the product is very
soiled, clean it with a soft cloth moistened with a diluted non-
aggressive cleaning solution or diluted ethyl alcohol.
CAUTION
Do not use abrasive or aggressive cleansing
agents or abrasive pads to clean scan windows,
contacts or plastics.
Do not spray or pour liquids directly onto the
unit.
To Next Page
Loading...
Need help?
General
