Datalogic Rhino 10 User Manual

User Manual Rhino™ 10
4. Once the scanner is in discovery mode, simply tap “Scan” on the Bluetooth tab. After a few seconds a list of
all available Bluetooth device names will be displayed in the Devices list box.
5. Select the device you want to pair with the Rhino™ 10 and tap “Pair”. If the scanner has security enabled an
Authentication Request dialog will appear. You can use an attached keyboard or use the SIP to enter the
PIN.
10

Datalogic Rhino 10 Specifications

General

Brand	Datalogic
Model	Rhino 10
Category	Desktop
Language	English