Datalogic Rhino 10 User Manual (English)

Other manuals for Datalogic Rhino 10

Questions and Answers:

A
April SalazarAug 10, 2025
How to fix Datalogic Automobile Accessories when it won't turn on?
- A
  Anthony CollinsAug 10, 2025
  If you press the power button on your Datalogic Automobile Accessories and nothing happens, first ensure it is connected to a power supply and that the green LED is on or blinking. Also, check the brightness setting; it might be set too low or too high. Try pressing the UP key to adjust the brightness. If these steps don't work, try a warm boot by pressing the reset button inside the upper left cover.
M
Matthew ColeAug 16, 2025
What to do if Datalogic Automobile Accessories is not connecting to the access point?
- D
  daniel75Aug 16, 2025
  If your Datalogic Automobile Accessories isn't communicating with the access point, verify that the access point is powered on and functioning correctly. Ensure you are within the access point's range; try moving closer to reestablish the connection. Confirm that your device is correctly configured for your network settings. Rebooting the device might also resolve the issue.
V
Veronica RobertsonAug 22, 2025
How to unlock Datalogic Automobile Accessories when it freezes?
- A
  Alexandra BennettAug 22, 2025
  If your Datalogic Automobile Accessories seems locked up, try turning it off by pressing and holding the power button, then turn it back on. If that doesn't work, perform a warm boot by pressing the reset button inside the upper left cover.
D
Donald ReeseAug 28, 2025
Why Datalogic Automobile Accessories stops sending messages after suspension?
- R
  Rachel FarrellAug 28, 2025
  If your Datalogic Automobile Accessories stops sending or receiving messages after being suspended, it might be due to the host deactivating your terminal emulation session. To resolve this in a TCP/IP direct connect network, disable the “Keep Alive” message from the host (if possible) to maintain the TCP session while the device is suspended.
W
Willie PerezSep 3, 2025
How to fix Datalogic Automobile Accessories touch screen when it is not responding?
- A
  Aaron WrightSep 3, 2025
  If tapping the screen of your Datalogic Automobile Accessories yields no response, you should align your screen.

Datalogic Rhino 10 Specifications

General

Model	Rhino 10
Manufacturer	Datalogic
Operating System	Windows Embedded Compact 7
Touchscreen	Yes
Connectivity	Wi-Fi, Bluetooth
Serial Ports	1 x RS232
Camera	No
Power	AC adapter
Interface	Touchscreen
Scanning Technology	Area Imaging
Supported Barcodes	1D, 2D
Humidity	5% to 95% non-condensing
Power Supply	AC adapter, battery
Compliance	RoHS

Related product manuals

Datalogic MEMOR K

88 pages

Datalogic Rhino 10 Installation Manual

Table of Contents

Other manuals for Datalogic Rhino 10

Questions and Answers:

Datalogic Rhino 10 Specifications

Related product manuals