Datalogic Rhino 10 Installation Manual

Installation Manual Rhino™ 10
Figure 4 – Base without Keyboard Mount
Figure 5 – Base with Keyboard Mount
Assemble the Mounting Arm
The mounting arm may come unassembled. Put the parts together as shown in Figure 6 and tighten the nut 2-3 turns.
Then, place the arm on the ball of the base with the spring side of the arm farthest away from to the unit.
6

Datalogic Rhino 10 Specifications

General

Brand	Datalogic
Model	Rhino 10
Category	Desktop
Language	English