Datalogic Rhino 10 User Manual

Rhino™ 10 User Manual
6. Once the scanner is paired, you can test it by scanning a label and examining the Test Data box.
At this point, you should save the configuration. Once the pairing has been saved ScanWedge will attempt to re-pair
with the scanner on each power up or whenever ScanWedge is restarted. When the dialog appears simply tap Scan to
re-pair with the scanner.
11

Datalogic Rhino 10 Specifications

General

Brand	Datalogic
Model	Rhino 10
Category	Desktop
Language	English