Datalogic SG2 BASE Series - Angled fixing bracket mounting with orientable and antivibration supports

To Next Page

To Previous Page

SG2 BASE

66/68

Fig 1 - Detection capability ......................................................................................................... 10

Fig 2 - Detection Zone................................................................................................................ 11

Fig 3 - Installation distance (vertical positioning) ........................................................................ 12

Fig 4 - Installation distance (horizontal positioning) ................................................................... 13

Fig 5 - Hand protection on moulding machine ............................................................................ 15

Fig 6 - Cooling and air conditioning systems .............................................................................. 16

Fig 7 - Automatic warehouses .................................................................................................... 16

Fig 8 - Wrong light curtain positioning ........................................................................................ 19

Fig 9 - Correct light curtain positioning ...................................................................................... 19

Fig 10 - Wrong light curtain positioning ...................................................................................... 19

Fig 11 - Correct light curtain positioning ..................................................................................... 19

Fig 12 - Distance from reflecting surfaces .................................................................................. 20

Fig 13 - Minimum distance from reflective surface ..................................................................... 21

Fig 14 - Distance between homologous devices ........................................................................ 22

Fig 15 - Recommended positioning for homologous devices ..................................................... 23

Fig 16 - Wrong light curtain TX-RX orientations ......................................................................... 24

Fig 17 - Use of deviating mirrors ................................................................................................ 25

Fig 18 - Path of the test piece .................................................................................................... 26

Fig 19 - Angle brackets .............................................................................................................. 27

Fig 20 - Rotating brackets .......................................................................................................... 27

Fig 21 - Fixing brackets .............................................................................................................. 28

Fig 22 - Dimensions (mm) .......................................................................................................... 28

Fig 23 - Receiver ........................................................................................................................ 29

Fig 24 - Emitter .......................................................................................................................... 29

Fig 25 - Connection to SE-SR2 Safety Relais ............................................................................ 30

Fig 26 - OSSDs connection ........................................................................................................ 31

Fig 27 - Ground connection configuration .................................................................................. 32

Fig 28 - ....................................................................................................................................... 33

Fig 29 - Receiver & Emitter ........................................................................................................ 33

Fig 30 - Test timings .................................................................................................................. 37

Fig 31 - Reset timings ................................................................................................................ 37

Fig 32 - Signalling LEDs............................................................................................................. 38

Fig 33 - Dimensions (mm) .......................................................................................................... 46

Fig 34 - Dimensions (mm) .......................................................................................................... 47

Fig 35 - ST-KSTD ...................................................................................................................... 48

Fig 36 - Angled fixing bracket ..................................................................................................... 49

Fig 37 - Angled fixing bracket + Orientable support ................................................................... 49

Fig 38 - Angled fixing bracket + Antivibration support ................................................................ 49

Fig 39 - Angled fixing bracket + Orientable support + Antivibration support .............................. 49

Fig 40 - ST-KPxMP .................................................................................................................... 50

Fig 41 - Angled fixing bracket ..................................................................................................... 51

Fig 42 - Angled fixing bracket + Orientable support ................................................................... 51

Fig 43 - Angled fixing bracket + Antivibration support ................................................................ 51

Fig 44 - Angled fixing bracket + Orientable support + Antivibration support .............................. 51

Fig 45 - Dimensions (mm) .......................................................................................................... 52

Fig 46 - Dimensions (mm) .......................................................................................................... 53

Fig 47 - Fixing kit ........................................................................................................................ 53

Fig 48 - Dimensions (mm) .......................................................................................................... 54

Fig 49 - Mounting ....................................................................................................................... 54

Fig 50 - Dimensions (mm) .......................................................................................................... 55

Fig 51 - Dimensions ( mm) ......................................................................................................... 56

All manuals and user guides at all-guides.com

Main Page

Datalogic SG2 BASE Series - Angled fixing bracket mounting with orientable and antivibration supports

Table of Contents

Other manuals for Datalogic SG2 BASE Series