Need help?Do you have a question about the Datalogic SG2 BASE Series and is the answer not in the manual?
General| Type | Safety light curtain |
|---|---|
| Supply Voltage | 24 VDC ± 20% |
| Safety Level | PL e |
| Operating Temperature | +55°C |
| Storage Temperature | -25 °C to +70 °C (-13 °F to 158 °F) |
| Protection Degree | IP65 |
| Humidity | 95% (non-condensing) |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Certifications | CE |
| Resolution | 14mm, 30mm |
Product is Class A, may cause radio interference in domestic environments.
Overview of safety light curtains as optoelectronic multibeam devices.
Lists items included in the product package.
Highlights new features of the SG2 MUTING series.
Guide to selecting the appropriate safety light curtain based on requirements.
Examples of industries and machines where SG2 MUTING is used.
Crucial points for correct and safe operation of safety light curtains.
Details of the terminator cap accessory.
Description of the tool for Basic Configuration Mode setup.
Information on metal angled fixing brackets for mounting.
Mounting options for brackets with orientable and antivibration supports.
Information on plastic angled fixing brackets.
Details on protective stands for light curtains.
How to mount the plate kit with SG-PSB stands.
Information on columns and floor stands.
Details on deviating mirrors for extending detection coverage.
Mounting kit for deviating mirrors with SE-S stands.
Mounting kit for deviating mirrors on SG-PSB stands.
Details of test pieces for verifying safety light curtain operation.
Information on various connection cables available.
Details on pigtail cables for unit connections.
Information on the laser pointer accessory for alignment.
Details on the SE-SR2 safety relay.
Information on the EDM relay box.
Details on muting lamps for status indication.
Details on single muting arms for muting applications.
Information on double muting arms.
Details on muting arms with external sensors.
Instructions for mounting SG-M muting arm kits.
Information on the SG-M-CB connection box.
Information on the SG-SRT connection box.
Details on SG-BWS safety control units.
Important precautions for selecting and installing the device.
Details on connector pin assignments for muting configuration.
Table detailing configurations for partial muting based on LED status.
List of selectable functions for the transmitter unit.
Defines how the light curtain returns to normal operation after interruption.
How to dynamically disable or enable the muting function.
Requirement to connect a signalling device for muting function.
Example of a muting setup on a conveyor.
Description of the 8-LED user interface for control and troubleshooting.
Recommendations for product disposal according to local laws.
To Next Page
