DVI-D Input Socket
The DVI-D Input socket is used to connect the DVI input source to the x4. The x4 supports Dual Link DVI,
Single Link DVI and also HDMI (not HDCP compliant) by using the optional DVI/HDMI Adapter.
DVI-I Output Sockets
The four DVI-I Out sockets are used to connect the x4 to the output monitors. The x4 supports both DVI
and analog RGB monitors.
Power
The Power socket is where the power source is connected to the x4. The x4-PSU supplied is plugged into
the Power socket. The power LED on the front of the x4 illuminates when a power supply is
connected.
12
To Next Page
Loading...
