4.2 Accessing Web Page
4.2.1 From LAN port
1. Make sure your PC have connected to the router’s LAN port correctly.
Notice: You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the
default IP address of router is 192.168.1.1. For the detailed information, please refer to the later section - Trouble shooting of the guide.
2. Open a web browser on your PC and type http://192.168.1.1. The following window will be open to ask for username and
password, and you can choose language.
3. For administrator mode operation, please type “admin/Password1” on Username/Password and click Login to configuration.
Notice: If you fail to access to the web configuration, please go to “Trouble
Shooting” for detecting and solving your problems.
4. The web page can be logged out after 5 minutes without any operation.
To Next Page
Loading...
Need help?
General
