4.2.2 From WAN port
1. Make sure your PC can connect to the router’s WAN port correctly.
2. Getting the IP addresses of WAN port using Voice prompt.
3. Open a web browser on your PC and type http://the IP address of WAN port. The following window will be open to ask for
username and password.
4. For administrator mode operation, please type “admin/Password1” on Username/Password and click Login to configuration.
Notice: If you fail to access to the web configuration, please go to “Trouble
Shooting” for detecting and solving your problem.
5. The web page can be logged out after 5 minutes without any operation.
To Next Page
Loading...
