DataRemote Pots In a Box CDS-9090 User Manual

2 LED Indicators and Connectors
Before you use the high-speed router, please get acquainted with the LED indicators and connectors first.
2.1 LED Indicators
Rear Panel
LED
Status
Explanation
PWR
On (GREEN)
The router is powered on (External Power) and running normally.
On Blinking (GREEN)
The router is powered on (Internal Power - BAT) and running
normally.
OFF
The router is powered off.
SYS
On (GREEN)
System OK
On (RED)
System Fault (SW or HW)
BATTERY(BAT)
On (GREEN)
Battery Charged
On Blinking (GREEN)
Battery Charging
Red
Battery Low or not connected
FXS ports
On (GREEN)
Registered
OFF
Not Registered
WPs
OFF
Not Registered
On (GREEN)
Active for Key registration
WiIFi Client
OFF
Non active for Key registration
On (GREEN)
Wireless Client Connected
On Blinking (GREEN)
Wireless traffic (Data)
WIFI AP
OFF
The Wireless Client is powered off or not connected
On (GREEN)
Wireless AP ready
On Blinking (GREEN)
Wireless traffic (Data)
WAN ETH
OFF
The Wireless AP is powered off
On (GREEN)
Connected (Registered)
On Blinking (GREEN)
Connected (Data)
Cell 1/2
OFF
Disconnected
On (GREEN)
Connected (Registered)
On Blinking (GREEN)
Connected (Data)

DataRemote Pots In a Box CDS-9090 Specifications

General

Brand	DataRemote
Model	Pots In a Box CDS-9090
Category	Wireless Router
Language	English