Before Setting Up
The VAB-1 uses a cellular network and/or terrestrial broadband for internet communication. The VAB-1 does not
use carrier provided phone wall jacks (POTS lines).
Select which phone(s) you will use with VAB-1
• Before you begin setup, unplug your existing phone(s) from the wall jack(s).
• If you would like multiple handsets throughout your home, please use a cordless phone system that
includes multiple handsets.
Select a location for your VAB-1 device
An ideal location balances several factors:
• Near your existing phone.
• Where you have a strong cellular signal from a cell tower, typically on the first or second floor near a
window or outside wall. Signal strength may vary in different parts of your location.
• Near an electrical wall outlet.
• Near your broadband router.
Device Installation on a Tabletop
The VAB-1 is designed to stand alone on a horizontal surface, i.e. desktop, tabletop, or shelf. Make sure the
bottom of the device (the side with the circular battery cover) is facing down on the table top.
To Next Page
Loading...