11
RECOMMENDED 1394 DEVICE DRIVERS FOR THE DAC-2 TO
WORK WITH PC/MAC DV EDITING SYSTEMS:
The 1394 driver configuration for PC/MAC Editing System
PC / Mac Editing System configuration 1394 Driver
WIN2000 + AVID R2.0 + Canopus DVRaptor card DVRaptor Driver
WIN2000 + AVID R2.0 + Datavideo DSE-100 1394 card AVID TI Driver
WIN2000 + AVID R2.0 + ADS PYRO 1394 card AVID TI Driver
WIN2000 + AVID R3.0 + ADS PYRO 1394 card AVID TI Driver
WIN2000 + Raptor AP R2.01 + Canopus DVRaptor card DVRaptor Driver
WIN2000 Ulead Media Studio 6.0 + PC 1394 card MS 1394 Driver
WIN ME + Ulead Media Studio 6.0 + PC 1394 card MS 1394 Driver
WIN ME + Raptor AP R2.01 + DVRaptor card DVRaptor Driver
MAC iMovie 2.01 iMAC 1394 Driver
MAC Final Cut Pro 2.02 iMAC 1394 Driver
SONY VAIO Dvgate SONY 1394 Driver
WIN 98SE + Raptor AP R2.01 + DVRaptor card DVRaptor Driver
WIN98SE Ulead Media Studio 6.0 + PC 1394 card TI 1394 Driver
Important Notices:
1. We Recommend using SCSI HDD or Ultra DMA-66 or Higher IDE HDD
2. Please shut down all resident programs in your PC for better editing performance.
Such as the Anti-Virus programs.
Avid Xpress (NTSC ONLY) 3.0 Users:
In Xpress DV 3, go to “Settings”, “Deck Configuration” and select “FireWire on OHCI” and
connect it to “Generic DV Device Basic NTSC”
Currently, the DAC-2 is not functioning correctly when the DAC-2 is selected in the deck
configuration menu.
If you need some help, please feel free to contact us at: contactus@datavideo-tek.com
To Next Page
Loading...
