Zettle Terminal USER GUIDE 1 DATECS Page 19 of 24
UM 07.01.27/v1.5.0
Smart Card Reader Use
The smart card transaction procedure can vary depending on the application loaded on the Zettle
Terminal. Verify the proper procedure with your application provider before performing a smart card
transaction.
To Conduct a Smart Card Transaction
1 Position a smart card with the gold contacts facing upward (Figure 7).
2 Insert it into the ICC card reader slot in a smooth, continuous motion until it seats firmly.
3 Hand Zettle Terminal to customer for PIN entry
4 Remove the card when the display indicates the transaction is completed.
Figure 7
Leave the smart card in the card reader until the transaction is completed. Premature
removal can void the transaction.
To Next Page
Loading...
