Need help?Do you have a question about the Datron neo and is the answer not in the manual?
Checking transport route for width, height, and load-bearing capacity is crucial for safe machine delivery.
Ensuring the floor is strong, rigid, and smooth, and maintaining clearance around the machine is vital for installation.
Maintaining temperature between 18-30°C and humidity below 65% is essential for optimal machine performance.
Do not cover the screen during operation to prevent excessive heat development and keep ventilation slots free.
Ensure power supply meets EN 60204 standards and use a separate circuit with an RCD (Type B) for safety.
An Internet connection is necessary for remote maintenance, enabling DATRON support and analysis.
Integrate the machine into your network at your own risk, consulting an IT specialist if questions arise.
Use only approved control components and do not install unapproved applications or virus scanners.
Compressed air must be dry, clean, and oil-free, meeting specific purity classes for spindle longevity.
Select appropriate cooling lubricant based on application; ethanol is not permitted for sparking metals or chip suction.
Only use suction systems permitted for the material being machined.
Provides detailed physical dimensions and weight specifications for the DATRON neo CNC base system.
In dry machining, dusts harmful to health can be released; use a suitable vacuum cleaner and observe SDS.
Use only DATRON-recommended lubricants; ensure ventilation and label canisters. Suctioning is prohibited with cooling lubricants.
Ethanol is flammable and hazardous with sparks; use sparingly and avoid chip suctioning with ethanol.
When cleaning, wear protective gear for dusts and coolants. Empty chip tray regularly and use an ignition-free vacuum cleaner.
Checking transport route for width, height, and load-bearing capacity is crucial for safe machine delivery.
Ensuring the floor is strong, rigid, and smooth, and maintaining clearance around the machine is vital for installation.
Maintaining temperature between 18-30°C and humidity below 65% is essential for optimal machine performance.
Do not cover the screen during operation to prevent excessive heat development and keep ventilation slots free.
Ensure power supply meets EN 60204 standards and use a separate circuit with an RCD (Type B) for safety.
An Internet connection is necessary for remote maintenance, enabling DATRON support and analysis.
Integrate the machine into your network at your own risk, consulting an IT specialist if questions arise.
Use only approved control components and do not install unapproved applications or virus scanners.
Compressed air must be dry, clean, and oil-free, meeting specific purity classes for spindle longevity.
Select appropriate cooling lubricant based on application; ethanol is not permitted for sparking metals or chip suction.
Only use suction systems permitted for the material being machined.
Provides detailed physical dimensions and weight specifications for the DATRON neo CNC base system.
In dry machining, dusts harmful to health can be released; use a suitable vacuum cleaner and observe SDS.
Use only DATRON-recommended lubricants; ensure ventilation and label canisters. Suctioning is prohibited with cooling lubricants.
Ethanol is flammable and hazardous with sparks; use sparingly and avoid chip suctioning with ethanol.
When cleaning, wear protective gear for dusts and coolants. Empty chip tray regularly and use an ignition-free vacuum cleaner.
General| Brand | Datron |
|---|---|
| Model | neo |
| Category | Control Systems |
| Language | English |
To Next Page