Setting up the machine
Screen
1
Setup instructions neo
1.21
DATRON AG
1-3
Location
Exchanged air
per hour
Workshops 3 - 6
Workshops where especially high levels of fumes
develop
10 - 18
Laboratories 5 - 15
Garages 3 - 5
CAUTION
Hearing damage dur to noise during machine operation!
At idle the noise level at the machine is < 80 dB(A).
When machining a work piece, the noise level may be > 80 dB(A).
■
Wear suitable hearing protection at noise levels above
80 dB(A).
■
Hearing protection must be available at lower noise levels.
■
Work pieces and sheet material that tend to vibrate during
machining must be clamped flat (e. g. with a vacuum plate).
1.4 Screen
Screen
CAUTION
Possible damage to the screen!
Covering the screen leads to excessive heat development.
■
Never cover the screen during operation.
■
Keep ventilation slots free.
To Next Page
Loading...