APPENDIX C
SNMP
C.0 GENERAL
The TS2000 provides remote configuration and status monitoring through the use of SNMP
(Simple Network Management Protocol). The TS2000 supports both SNMPv1 and SNMPv2
packets through the use of a bilingual SNMP agent.
C.1 DATUM MIB EXTENSION
The data available from the TS2000 through SNMP is based on the MIB-II variable set which
has been enhanced with a custom MIB extension to provide data unique to ntp and the TS2000.
Manufacturer specific, or enterprise, MIB extensions are given a unique identifier which defines
where the extension is located in the MIB tree. Datum Inc has been assigned an enterprise
number of 601. Datum Inc is currently in the process of compiling a RFC to define a
standardized ntp variable set and allocate space in MIB-II. Due to this ongoing process, the
current MIB extension is defined as experimental (volatile). If you have any input regarding the
RFC, or changes to the MIB extension, send email to info@datum.com. Please include
datumMIB in the subject. A definition of the MIB extension in shown.
DATUM DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
ObjectName, Integer32, Counter32, snmpModules
FROM SNMPv2-SMI
TruthValue, DisplayString, TestAndIncr, TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF;
datumMIB MODULE-IDENTITY
LAST-UPDATED "951025"
ORGANIZATION "Datum Inc."
CONTACT-INFO
"
Greg Dowd
Datum Inc., Bancomm Div.
6541 Via del Oro
To Next Page
Loading...
General