CHAPTER 1
INTRODUCTION
1.0 GENERAL
The TYMSERVE 2000 Network Time Server Operation and Technical Manual provides the
following information:
- General Information and Specifications
- Installation
- Operation and Network Interface
- Input/Output Connectors
1.1 TYMSERVE 2000 FEATURES
The salient features of the TYMSERVE 2000 include:
- User selectable time sources (-GPS, -IRIG versions):
GPS Satellite Receiver (-GPS version only)
IRIG B time code
Free running internal clock (time set by user)
External 1 PPS input
- -ACTS version uses the NIST Automated Computer Time Service via telephone for
timing.
- Compatible with NTP (Network Time Protocol) Version 2 and 3.
- Supports both the DIX Ethernet and IEEE 802.3 (w/802.2 headers) ethernet frame
format. Connection via an AUI connector.
- Provides remote status and configuration with both SNMPv1 and SNMPv2 using MIB-
II and a custom MIB extension.
- Provides a menu driven interface for setting up the Internet address and various other
parameters.
To Next Page
Loading...