15
Analmodulescreenisdisplayedshowingwhichspecicmoduleswereinitialized.
The controller then displays the lamp optimization screen for 60 seconds to allow
thelamptoreachitsoptimumoutput.Finally,anal“start-upcomplete”screenis
displayed.Thesystemwillnowbereadytodisinfectwaterow.
all detected modules lamp reaching max output successful start-up
MCXS Operational Screens
On systems without the UV monitor, the default screen shows the Microlene Home
Screen. At any point during operation the user is able to scroll through the Microlene
Home Screen, Lamp life remaining, QR Code, Contact Info and Maintenance
Parts screens by pressing the button located on the front of the controller.
4-20 mA
Ethernet
Remote Alarm
Module Check
Module Check
Module Check
OR
OR
OR