TROUBLE SHOOTING:
No Chlorine Production - Check for
1. Main power outlet switched off
2. Chlorinator not plugged into main outlet
3. Pump not plugged into Chlorinator
4. Time Clock set to Off position/Power switch turned Off
5. Sanitiser Output Control turned to “o” setting
6. Chlorinator fuse blown
7. Dirty Cell
8. Filter needs back washing
9. Gas Sensor not connected
10. Insufcient water ow through cell
11. Running times incorrect
12. Main house fuse blown
13. Pump motor faulty
Low Chlorine Production - Check for
1. Dirty Cell - clean if required
2. Filter needs back washing
3. Cell failing
4. Pool stabiliser too low
5. pH too high
6. Salt level too low
7. Running time inadequate
8. Sanitiser output control set too low.
Notes & Service History:
To Next Page
Loading...
Need help?
General
