AUTOMATIC TIME CLOCK OPERATION:
The digital timer includes a backlit Liquid Crystal Display which displays time of day in 12-Hour format with AM /
PM indication and a selector
switch position indicator. The digital timer has up and down buttons for incremental
settings.
Timer Setting and Functions:
To set your clock and various functions please refer to the table of instructions below.
NOTE:
When you rst turn on the power to the chlorinator, it will take approximately 5 seconds for the LCD to appear on
the screen.
Function
Description
Selector
Switch
Position
Functions and Instructions
Set Clock 1
Set the current time on the digital clock
Select the Set Clock position on the selector switch to enable the
time of day to be input. A number ‘1’ will appear at the left of
the screen.
(a) The display will ash on and off as long as the selector switch
remains at this position. Use the up
and down buttons to reach
the desired times. Hold the buttons down for fast increments
Set Timer 1 - ON 2
Set the start time for the rst run time sequence
Select the Set Clock 1-ON position on the selector switch. A
number ‘2’ will appear at the left of the screen.
This time factory pre-set to 6am. Proceed as per (a) in the ‘Set
Clock” instruction to change time.
To disable this timer, move up or down to 11:59PM. Press the UP
button one more time to turn OFF. NOTE: This step will also disable the
time for ‘Set Timer 1 -OFF’.
8:00
6
AM
To Next Page
Loading...
Need help?
General
