Chapter 3
Page 30 Vantage Pro Console Manual
• Rain Rate
Press the RAINYR / RAINDAY key to display the current rain rate.
Rain Rate may be displayed as either inches per hour (in/hr) or millimeters per
hour (mm/hr). If there has been rain in the last 15 minutes, the total will be dis-
played in the ticker.
• Month-to-date precipitation
Press the RAINYR / RAINDAY again to select the month-to-date precipitation
record. Monthly rain displays the precipitation accumulated since the calendar
month began. Month-to-date precipitation is displayed in inches (in) or milli-
meters (mm).
• Year-to-date precipitation
Press the RAINYR / RAINDAY key a third time to display
the year-to-date precipitation record. Yearly rain displays
the precipitation accumulated since the 1st of the month
you’ve chosen in Setup Mode (See “Setup Mode - Screen
13: Rain Season” on page 26.) Year-to-date precipitation is displayed in inches
(in) or millimeters (mm).
Note: The“Year-to-date” and “Month-to-date” registers record precipitation accumulation for 1 year and 1
month respectively; however, you may start each counting period whenever you wish.
“Daily” and “Storm” Rain
• “Daily” Rain
Press and release the 2ND key, then press the
RAINYR / RAINDAY key. Daily Rain displays the
rain accumulated since 12 midnight. Any rain
accumulated in the last 24 hours will be displayed
in the ticker.
To Next Page
Loading...
